Pioneer Pioneer SOUND & VISION MIXER, SVM-1000 manual 24

USING THE EFFECT FUNCTION

				Parameter 1		Parameter 2
		Description of the effect	Beat button parameter	(TIME/PARAMETER)		(LEVEL/DEPTH)
				Description		Description
ROBOT9.	AUDIOVIDEO	The input sound is given an	Sets the effect of the robotic sound	Sets the effect of	–100 to 100	The effect is enhanced as the
		effect like that created by a	pitch between –100 % and 100 %	the robotic sound	(%)	dial is rotated to the right.
		robot.		pitch.
		A robot-like video is created	Sets the ratio of the mix between the	Sets the ratio of the		The up and down swinging is
		by swinging the image up	mosaic size and the original video	mix between the		enhanced as the dial is rotated
		and down and applying a	between –100 % and 100 %	mosaic size and		to the right.
		mosaic filter.		the original video.
CHORUS10.	AUDIOVIDEO	An expansive sound as if	For the time of 1 BPM beat, a 1/2 to	Sets the interval in	10 to 32 000	Sets the balance between the
		various sources were	32/1 time will be set for the interval of	which the chorus	(ms)	original sound and the chorus
		emitting the same sound	the vibrato of the chorus sound.	sound is		sound.
		pitch.		modulated.
		A video divided into RGB	For the time of 1 BPM beat, a 1/2 to	Sets the interval in		Sets the balance between the
		components is output to the	32/1 time will be set for the interval in	which the image		original video and the effect
		beat.	which the image returns to the	returns to its		video.
			original.	original.
	(*2)	Records and repetitively	For the time of 1 BPM beat, a 1/8 to	Sets effect time.	10 to 4 000	Sets the balance between the
(*5,ROLL7)		outputs the beat sound.	8/1 effect time is be set.		(ms) (*3)	original sound and the ROLL
	AUDIO(*6)
						sound.
		Records and repetitively	For the time of 1 BPM beat, a 1/8 to	Sets the time in		Sets the balance between the
11.	VIDEO	outputs the beat image.	8/1 effect time is be set.	which the image is		original video and the effect
				repeated.		video.
(*5,ROLL7)	AUDIO(*2)	Records and repetitively	For the time of 1 BPM beat, a 1/8 to	Sets effect time.	10 to 4 000	Sets the balance between the
		outputs the beat sound in	8/1 effect time is be set.		(ms) (*3)	original sound and the ROLL
		reverse.				sound.
REVERSE12.	(*6)VIDEO	Records and repetitively	For the time of 1 BPM beat, a 1/8 to	Sets the time in		Sets the balance between the
		outputs the beat video in	8/1 effect time is be set.	which the image is		original video and the effect
		reverse.		repeated.		video.

(*1) When the effect channel display shows [CFA], [CFB], or [MST]/[MASTER], even if the effect monitor is turned ON, if the selected channel’s sound is not output to the master output, the effect sound will not be heard.

(*2) If effect is set to OFF, the effect sound will not be audible when monitoring effects.

(*3) The shortest video effect time value is: For NTSC, 66 ms. For PAL, 80 ms.

(*4) The shortest video effect time value is: For NTSC, 99 ms. For PAL, 119 ms.

(*5) When the visualizer function is switched from ON to OFF, the visualizer’s image will be subjected to ROLL in the sampling state.

(*6) When effects are set to OFF, images with effects applied will not be displayed on the video effects monitor.

(*7) Effects will be disabled in all channels if copy-protected contents are input to any channel. In other words, in this case effects will not function even if non-copy-protected contents are input to the channel to which you wish to apply effects.

Video effect pattern

No.	Name	Description of video effect pattern
1	ORIGINAL	Original image without video effect pattern.
2	INVERSE	Inverts brightness.
3	EDGE	Creates a border around the image.
4	HUE	Changes the color (except black and white).

24

En