SPECIFICATIONS
Model Name
TAD Reference One
Model No.
Design
Drive units
Bass driver | 25 cm (10 in.) cone x2 | |
Midrange/Tweeter | concentric | |
16 cm (6 1/2 in.) cone/ 3.5 cm (1 3/8 in.) dome | ||
Performance Data |
|
|
Frequency Range | 21 Hz to 100 kHz | |
25 Hz to 20 kHz, ±3 dB; frontal average response | ||
Crossover Frequencies | 250 Hz, and 2 kHz | |
Amplifier Requirements | ...................50 W to 300 W | |
Sensitivity |
|
|
........90 dB @ 2.83 V and 1 m (anechoic conditions) | ||
Maximum Output | 115 dB | |
Nominal Impedance | 4 ohms (minimum 4.1 ohms) | |
Physical Data |
|
|
Weight | 150 kg (330 lb) | |
Dimensions |
|
|
Height | 1293 mm (50 7/8 in.) | |
Width | 554 mm (21 13/16 in.) | |
Depth | 698 mm (27 1/2 in.) |
18 TAD Reference One Owner’s Manual
Supplied accessories
Guide to unpacking unit (Attached to exterior of packaging)
Accessory kit
•Cleaning cloth x 1
•Shorting links x 2
•
•Round spikes x 3
•Hex wrench x 1
•This Owner’s Manual x 1
Note: Included parts may vary slightly by region.
The specifications and construction details in this and related TAD publications are subject to change without
notice. The TAD logo is a registered trademark of Technical Audio Devices, Inc.
27 1/2 in.
(698 mm)
50 7/8 in.
(1293 mm)
21 13/16 in.
(554 mm)
Figure 12. Overall dimensions of the TAD Reference One loudspeaker.