CONNECTING THE LOUDSPEAKERS
Single-Wire Connections
For single-wire connections, connect the high- and low-frequency sections of the crossover network with the shorting link that was included with this unit, then connect the (+) wire from your amplifier to either red binding post and the (-) wire from your amplifier to either black binding post, as shown in Figure 8.
| | | | | Amplifier |
| | | | | | | |
| | | | | (rear) |
| | | | | | | | |
| | | | SPEAKERS OUTPUT |
Terminal Panel | (one channel shown) |
| | | | | | | | |
| HF | | | | | | | |
| | | Shorting links |
TAD Reference One
Figure 8. Connecting a TAD Reference One loudspeaker in a single-wired system.
12 TAD Reference One Owner’s Manual
