Connecting your equipment
Connecting the speakers
The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended, and a complete setup is best for surround sound.
Make sure you connect the speaker on the right to the right (R) terminal and the speaker on the left to the left (L) terminal. Also make sure the positive and negative
You can use speakers with a nominal impedance between 6 Ω and 16 Ω.
Be sure to complete all connections before connecting this unit to the AC power source.
Bare wire connections
02
Front right |
| Front left |
| Subwoofer |
|
|
| Center | |
|
|
|
| |
|
|
|
| LINE LEVEL |
|
|
|
| INPUT |
HDMI DVR/BDR IN DVD IN | BD IN CD/SAT IN OUT | COAXIAL | OPTICAL |
|
|
| IN 1 | IN 1 ASSIGNABLE |
|
|
| (TV) |
|
Front speaker terminals: | 1 | 2 | 3 | ||
1 | Twist exposed wire strands together. | ||||
|
|
| |||
2 | Loosen terminal and insert exposed wire. |
|
|
| |
3 | Tighten terminal. |
| 10 mm |
| |
|
|
| |||
Center and surround speaker terminals: | 1 | 2 | 3 | ||
1 | Twist exposed wire strands together. | ||||
|
|
| |||
2 | Push open the tabs and insert exposed |
| 10 mm |
| |
wire. |
|
| |||
|
|
| |||
| AUDIO |
|
| SURRBACK | |
|
| PREOUT |
|
| L |
|
| (Single) |
| OUT |
|
|
| R |
VIDEO |
| L |
| IN | CD/SAT |
| CD/SAT | IN |
| R | |
| IN |
|
| DVD | L |
| IN | IN |
|
| R |
MONITOR | SUBWOOFER | DVD |
OUT | PRE OUT |
|
ANTENNA | R | FRONT | L | SPEAKERS A |
|
|
| ||||
| CENTER SURROUND | ||||
AM LOOP |
|
|
| ||
|
|
| R | L | |
|
|
|
| ||
FM UNBAL |
|
|
|
|
|
75 |
|
|
|
|
|
3 Release the tabs.
CAUTION
•These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts.
•Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If any of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure.
Connect the surround back speakers
Connect the SURR BACK PRE OUT outputs of the unit and additional amplifier to add a surround back speaker.
•You can use the additional amplifier on the surround back channel
Surround right | Surround left |
Surround back | Surround back |
right | left |
R ANALOG L
AUDIOIN | SPEAKER R | SPEAKER L |
|
|
Surround back channel amplifier
11
En