Pioneer VSX-322-K Connecting using HDMI, Connecting your component with no HDMI terminal, ARC, Note, HDMI SET, Connecting a TV and playback components

02Connecting your equipment

Connecting a TV and playback components

Connecting using HDMI

If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player, etc.), you can connect it to this receiver using a commercially available HDMI cable.

• The following connection/setting is required to listen to the sound of the TV over this

receiver.

Connecting your component with no HDMI terminal

This diagram shows connections of a TV and DVD player (or other playback component) with no HDMI terminal to the receiver.

HDMI	DVR/BDR IN DVD IN	BD IN	CD/SAT IN	OUT	COAXIAL	OPTICAL
					IN 1	IN 1 ASSIGNABLE
					(CD-R /TAPE)	(TV)

-If the TV does not support the HDMI Audio Return Channel function, connect the receiver

and TV with audio cables (as shown).

-If the TV supports the HDMI Audio Return Channel function, the sound of the TV is input

to the receiver via the HDMI terminal, so there is no need to connect an audio cable. In

this case, set ARC at HDMI SET to ON (see ARC Setup on page 27).

HDMI	DVR/BDR IN DVD IN	BD IN	CD/SAT IN	OUT	COAXIAL	OPTICAL
					IN 1	IN 1 ASSI
					(CD-R /TAPE)	(TV)

AUDIO
CD-R/TAPE	SURRBACK
	PREOUT
	L
	(Single)
OUT
	R
VIDEO	L
IN	CD/SAT	ANTENNA
CD/SAT	IN	AM LOOP
	R
IN
DVD	L
IN	IN

R FRONT L SPEAKERS A

CENTER SURROUND

R L

		AUDIO
		CD-R/TAPE	SURRBACK
			PREOUT
			L
			(Single)
		OUT
			R
VIDEO			L
		IN	CD/SAT	ANTENNA
	CD/SAT		IN	AM LOOP
			R
	IN
	DVD		L
		IN	IN
			R
MONITOR	SUBWOOFER	TV	DVD	FM UNBAL
				75
OUT	PRE OUT

R FRONT L SPEAKERS A

CENTER SURRO

R

				R
MONITOR	SUBWOOFER	TV	DVD	FM UNBAL
				75
OUT	PRE OUT

VIDEOOUT

	OPTICAL	R	L
	DIGITALAUDIOOUT ANALOGAUDIOOUT
VIDEOIN	Select one
			R	L	COAXIAL
This connection is			ANALOGAUDIOOUT		DIGITALAUDIOOUT
				Select one

HDMIOUT
	HDMIIN	R	L	OPTICAL
HDMI/DVI-compatible
		ANALOGAUDIOOUT		DIGITALAUDIOOUT
Blu-ray Disc player			Select one
		If the TV does not support the HDMI
HDMI/DVI-		Audio Return Channel function, this
		connection is required to listen to the
compatible TV		TV sound over the receiver.

required in order to
listen to the sound of
the TV over the
receiver.
TV	DVD player

Note

•In order to listen to the audio from the DVD player that is connected to this receiver using a coaxial cable, first, switch to the DVD input, then press SIGNAL SEL to choose the audio signal C1 (COAXIAL1) (see Selecting the audio input signal on page 17).

14

En