Chapter
1 Controls and displays
Front panel |
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
17 | 18 | 19 | 20 | 21 | 19 | 22 |
23 | 24 | 25 | 26 | 27 | 27 | 28 |
10 | 11 | 12 | 13 | 14 |
1INPUT SELECTOR dial
Selects an input source (page 21).
2MCACC indicator
Lights when Acoustic Calibration EQ (page 27) is on (Acoustic Calibration EQ is automatically set to on after the Auto MCACC setup (page 19)).
3Receiver control buttons
SPEAKERS – Use to change the speaker system on or off. When the SP OFF is selected, no sound is output from the speakers connected to this receiver.
DIMMER – Dims or brightens the display. The brightness can be controlled in four steps.
DISPLAY – Switches the display of this unit. The listening mode, sound volume, input name can be checked by selecting an input source.
4Character display
See Display on page 7.
5Tuner control buttons
BAND – Switches between AM, FM ST (stereo) and FM MONO radio bands (page 25).
1516
TUNER EDIT – Use with TUNE /, PRESET / and ENTER to memorize and name stations for recall (page 25).
TUNE / – Used to find radio frequencies (page 25).
PRESET / – Use to select preset radio stations (page 25).
6HDMI indicator
Blinks when connecting an
7iPod iPhone indicator
Lights when an iPod/iPhone is connected and iPod/USB input is selected (page 23).
8Remote sensor
Receives the signals from the remote control (see Operating range of remote control on page 9).
9MASTER VOLUME dial
10STANDBY/ON
11 PHONES jack
Use to connect headphones. When the headphones are connected, there is no sound output from the speakers. The listening mode when the sound is heard from the headphone can be selected only from PHONES SURR, STEREO or STEREO ALC mode.
12 MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC setup (page 19).
13 Listening mode buttons
AUTO SURROUND/STREAM DIRECT – Switches between Auto surround mode (page 26) and Stream Direct playback (page 27).
ALC/STANDARD SURR – Press for standard decoding and to switch between the modes of 2Pro Logic and NEO:6, and the Auto level control stereo mode (page 26).
ADVANCED SURROUND – Switches between the various surround modes (page 27).
14ECO
Switches between ECO Mode 1/ECO Mode 2. When ECO Mode is turned ON, the display will go dark (page 27).
6