The System Setup menu 07
35
En
English Français
Deutsch
Nederlands
Italiano Español
1 Select ‘Surr Back System’ from the
System Setup menu.
See
Making receiver settings from the System
Setup menu
above if you’re not already at this
screen.
2 Select the surround back speaker
setting.
•
Normal (SB)
– Select for normal home
theater use with surround back speakers in
your main (speaker system A) setup.
•
Second Zone
– Select to use the (surround
back) B speaker terminals to listen to
stereo playback in another room (see
Second Zone speaker B setup
on page 54).
•
Front Bi-Amp
– Select this setting if you’re
bi-amping your front speakers (see
Bi-
amping your front speakers
on page 55).
3 When you’re finished, press RETURN.
You return to the System Setup menu.
Manual MCACC speaker setup
You can use the settings in the Manual MCACC
setup menu to make detailed adjustments
when you’re more familiar with the system.
Before making these settings, you should have
already completed
Automatically setting up for
surround sound (MCACC)
on page 9.
You only need to make these settings once
(unless you change the placement of your
current speaker system or add new speakers).
Important
•For some of the settings below, you’ll have
to connect the setup microphone to the
front panel and place it about ear level at
your normal listening position. See
Automatically setting up for surround
sound (MCACC)
on page 9 if you’re unsure
how to do this. Also see
Other problems
when using the Auto MCACC Setup
on
page 11 for notes regarding background
noise and other possible interference.
• If you’re using a subwoofer, switch it on
and turn up the volume as necessary.
1 Select ‘Manual MCACC’ from the
System Setup menu.
See
Making receiver settings from the System
Setup menu
above if you’re not already at this
screen.
2 Select the setting you want to adjust.
If you’re doing this for the first time, you might
want to make these settings in order.
•
Fine Ch Level
– Make fine adjustments to
the overall balance of your speaker system
(see
Fine Channel Level
below).
•
Fine SP Distance
– Make precise delay
settings for your speaker system (see
Fine
Speaker Distance
on page 36).
The last five settings are specifically for
customizing the parameters explained in
Acoustic Calibration EQ
below:
•
EQ AUTO Setting
– Measure the acoustic
characteristics of your room and
automatically adjust the frequency balance
of your speaker system (see
Setting the
Acoustic Calibration EQ automatically
below).
•
EQ Data Copy
– Copy Acoustic Calibration
EQ settings for manual adjustment (see
Copying your Acoustic Calibration EQ
settings
below).
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
: Exit
1.Surround Back System
Surr Back System
Normal (SB) ]
: Finish
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
: Exit
3.Manual MCACC
:Return
a.Fine Ch Level
b.Fine SP Distance
c.EQ AUTO Setting
d.EQ Data Copy
e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust
g.EQ Data Check
VSX_816.book.fm 35 ページ ２００５年１２月８日　木曜日　午後６時５４分