02 5 minute guide
3 Connect your speakers.
A complete setup of six speakers (including the subwoofer) is shown here, but everyone’s home setup will vary. Simply connect the speakers you have in the manner shown below. The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended, and all six is best. If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page 36) to large.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left to the left terminal. Also make sure the positive and negative
Use speakers with a nominal impedance of 8 Ω to 16 Ω.
Front Speakers | Center Speaker | Surround Speakers | |||
FL |
| FR | C | SL | SR |
|
|
|
|
|
|
|
|
|
|
|
|
R L | R L |
SW
INPUT
Powered subwoofer
Be sure to complete all connections before connecting this unit to the AC power source.
10
En
