04Controls and displays
Display
1
SIGNAL AUTO
DIGITAL DIGITAL
ANALOG DTS
2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|
| DIGITAL |
| ATT | DIRECT | MONITOR |
|
| |
| PROLOGIC |
|
| MIDNIGHT | STEREO | TUNED |
| |
| ADV.SURR. |
| LOUDNESS | MONO | SP | A | ||
|
|
|
|
|
|
|
| dB |
10
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the current component:
AUTO : Lights when AUTO signal select is on.
DIGITAL : Lights when a digital audio signal is detected.
2DIGITAL : Lights when a Dolby Digital signal is detected.
ANALOG : Lights when an analog signal is detected.
DTS : Lights when a source with DTS audio signal is detected.
2 DTS
When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver is on, this lights to indicate Prologic II decoding.
11 | 12 | 13 | 14 |
5 ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of the input signal (can only be used with an analog signal).
6 DIRECT
Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduc- tion of a source.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when MONITOR is selected.
9 Speaker indicator
Shows if the speaker system is on or not.
SP 3A means speakers are switched on. SP 3 means the headphones are connected.
10Character display
11ADV. SURR. (Advanced Surround) Lights when one of the Advanced Surround listening modes of the receiver is selected.
28
En