05Disc playback features
1Press HOME MENU and select ‘Disc Navigator’ from the
00:00/ 00:00 | 0kbps |
Folder1
Folder2
Folder3
Folder4
2 Use | and ENTER to navigate. | ||
Use the cursor up/down buttons ( | ) to | ||
move up and down the folder/file list. |
| ||
Use the cursor left button ( | ) to return to the | ||
parent folder.1 |
|
|
|
Use ENTER or cursor right ( | ) to open a | ||
highlighted folder. |
|
|
|
•When a JPEG file is highlighted, a thumbnail image is displayed on the right.
00:00/ 00:00 | 0kbps |
Folder2
File1
File2
File3
File4
File5
Tip
•To play the contents of the whole disc rather than just the current folder, exit the Disc Navigator and start playback using
the (play) button.
Looping a section of a disc
The
1During playback, press HOME MENU and select ‘Play Mode’.
2Select
3Press ENTER on ‘A(Start Point)’ to set the loop start point.
4Press ENTER on ‘B(End Point)’ to set the loop end point.
After pressing ENTER, playback jumps back to the start point and plays the loop.
5To resume normal playback, select ‘Off’.
3To play the highlighted track or DivX video file or display the highlighted JPEG file, press ENTER.
•When a WMA/MP3 or DivX video file is selected, playback begins from that file, and continues until the end of the folder.
•When a JPEG file is selected, a slideshow begins, starting with that file, and continues to the end of the folder.
Using repeat play
In addition to various repeat play options, it’s also possible to use repeat play together with program play (see Creating a program list on page 21).
1During playback, press HOME MENU and select ‘Play Mode’.
2Select ‘Repeat’ then select a repeat play
option.3
If program play is active, select Program Repeat to repeat the program list, or Repeat Off to cancel.
Note
1You can also do this by going to the ‘..’ folder at the top, then pressing ENTER.
2You can’t use
3You can’t use repeat play with WMA/MP3 discs.
20
En
