Pioneer S-GX3V, XV-GX3 manual Adjusting the sound

Adjusting the sound

Chapter 9

Adjusting the sound

09

English

Using the Sound menu

There are several optional sound settings you can make from the sound menu.

1 Press SOUND MODE (SHIFT+SFC).

2 Use	to choose the setting you want
to adjust.

The current setting is shown for each option (in the order shown in step 3) as you cycle through the display.

•If selecting an SFC memory (SFC MEM) press ENTER to continue to the next step.

3 Use to adjust (or select) the setting.

Make adjustments to the following settings:

Setting	What it does	Option(s)
Bass	Adjusts the amount of bass.	–4 to +4
Treble	Adjusts the amount of treble.	–4 to +4
Stereo	Makes the stereo spread	OFF
Wide	appear wider than it really is
		ON
SFC	Stores your current bass,	USER 1
Mem-	treble and stereo-wide
		USER 2
ory	settings as a preset.

4Repeat steps 2 and 3 for other settings.

•Skip this step if selecting an SFC memory.

5When you’re done, press ENTER to confirm and leave the Sound menu.

Using the Sound Field Control

Depending on the source you’re listening to, you may want to use the Sound Field Control to match the source you’re listening to.

•Press SFC repeatedly to select a mode. The options are as follows:

•ACTION – Good for sound effects.

•DOME – Gives a ‘live’ feel to the sound.

•DRAMA – Good for enhancing dialogue.

•KARAOKE – Reduces the level of vocal tracks on pre-recorded music.

•USER 1 / 2 – See Using the Sound menu above.

•SFC OFF – (SFC indicator disappears)

Boosting the bass level

If you want to bring up the low end for certain kinds of music or sound sources, you can use the bass boost to do so.

•Press P.BASS to switch the bass boost on (P.BASS 1) or off (P.BASS 0).

Muting the sound

•Press MUTE to switch off the volume. To switch the sound back on, adjust the volume or press MUTE again.

Deutsch Français Italiano Nederlands Español

27

En