Pioneer XWSMA1K, XWSMA4K standby/on button, standby/on button, standby/on button, Connect the AC adapter, and press, 2Connect the AC adapter, and press

Connect to network 04

A:Connections for wireless LAN using WPS- PBC function1Confirm that the AC adapter and LAN cable are not connected to the unit.

LAN(10/100) iPod/iPhone/iPad DC IN AUX IN

5The network connection settings will be performed automatically, and when the connection is complete, the unit's indicator will briefly change to flashing red, then light steadily blue.

The indicator will flash blue when the signal is weak.

on input network

2Connect the AC adapter, and pressstandby/on button.

The on indicator will flash blue. Wait for about 30 to 40 seconds.

6

3When the on indicator stops flashing, press the rear-panel network setup/wireless direct button.

The network indicator will change from flashing red to flashing purple.

network setup wireless direct

DC IN AUX IN

4Within 2 minutes, press the router’s WPS button.

For information regarding router operation, consult the router’s Operating Instructions.

WPS

blue

B:Wired connection to a router with DHCP server

1Disconnect the power cord from AC power before performing the connection between router and this unit.

Use a LAN cable to connect this unit and your router.

2Connect the AC adapter, and press

standby/on button.

The on indicator will flash blue. Wait for about 30 to 40 seconds.

6

3The on indicator's flashing will stop, and when the power is fully turned on, the network indicator will light blue.

on

WPS

input network

blue

19

En