Pitco Frialator L20-299 operation manual Installation/Operation, OPERATION Filling the Tank

Models: L20-299

1 20
Download 20 pages 45.37 Kb
Page 11
Image 11
OPERATION

INSTALLATION/OPERATION

OPERATION

Filling the Tank

Both liquid and solid shortening/oil can be used in this appliance, but liquid is preferred. If solid shortening/oil is used it is recommended that you melt the shortening/oil before adding it to the appliance. You can melt solid shortening/oil in the appliance, but you must be very careful not to scorch the shortening/oil.

Filling the tank with liquid shortening/oil

To fill the tank with liquid shortening/oil refer to the following procedure.

a.Ensure that the drain valve is completely closed and that there is no residual moisture in the tank.

b.Fill the tank with shortening/oil. You may fill the tank to the “OIL LEVEL” mark or slightly below this nominal level mark: the shortening/oil will expand slightly when it heats up, raising the level slightly.

Filling the tank with solid shortening/oil

To fill the tank with solid shortening/oil refer to the following procedure.

WARNING

NEVER melt blocks of solid shortening/oil on top of the burner tubes. This will cause a fire and could result in personal injury.

a.Remove the rack covering the tubes (tube rack).

b.Cut the solid shortening/oil into cubes no larger than one inch. ALWAYS pack the shortening/oil below, between, and on top of the burner tubes. DO NOT leave any large air gaps. Use care when packing the solid shortening/oil into the tank. DO NOT bend or break the temperature or high limit sensor probes. If these are damaged the appliance will not function properly.

c.Once the appliance tank is firmly packed with shortening/oil to the level mark, the shortening/oil must be melted. Melt the shortening/oil by cycling the main burners on for 4 seconds and off for 30 seconds repeatedly, using the thermostat knob. If your appliance has a Melt Cycle option, use this to melt the shortening/oil automatically.

OIL LEVEL LINE

BURNER TUBES

OIL LEVEL LINE

BURNER TUBES

EXCESSIVE

BURNER TUBES

AIR GAPS

 

Operating Instructions

To ensure the quality of the food you cook in this appliance, follow the preparation instructions from the food manufacturer. Using the best shortening/oil makes the best fried foods. The best shortening/oil will last longer than lower grade shortening/oil and save you money. When not in use, the shortening/oil should be cooled and covered to prevent contamination.

WARNING

This appliance has been installed using restraining devices to prevent accidental tipping or movement. DO NOT attempt to move the appliance when it is in use or has hot liquid in it.

Splashing hot liquids can cause severe burns.

8

Page 11
Image 11
Pitco Frialator L20-299 Installation/Operation, OPERATION Filling the Tank, Filling the tank with liquid shortening/oil