Pitney Bowes DM525, DM575 Changing the Wiper Blade Assembly

9 • Maintaining and Updating

9 - 18 SV62201 Rev. C

Changing the Wiper Blade Assembly

When you change the printhead, you must also replace the wiper blade

assembly.

Instructions for replacing the wiper blade assembly are included with each

replacement and are repeated here for your convenience.

1. From the IntelliLink® Control Center, press the Menu key.

2. Select Maintenance.

3. Select Replace Wiper Blade Assembly.

The “Preparing Wiper Blade” screen appears. During this time, the sys-

tem moves the printhead assembly back so that you can access the

wiper blade assembly.

4. The “Replace Wiper Blade Assembly” screen appears instructing you to

remove the wiper blade assembly from the package.

5. Lift the main cover and

locate the wiper blade

assembly.

6. Push the wiper blade tab

toward the back of the

machine. This causes the

wiper blade to slide to the

left.

7. Lift the wiper blade up

and out of the assembly

and discard.

8. Place the new wiper blade

in the assembly with the

two white prongs facing to

the right. Slide it to the

right until it snaps into

place.

9. Close the main cover; the

“Initializing Wiper Blade” screen appears.

9. Once the initializing is complete, the “Print Test Pattern” screen appears

and prompts you to “Press Tape or print an envelope”.

10. You must perform the print test at this time. Follow the prompts, or refer

to Printing a Test Pattern in this chapter for more information.

Wiper blade assembly

Wiper blade assembly

Contents

Main Page Page Alerting Messages FCC Compliance FCC Compliance of Modem Page Table of Contents Page Pitney Bowes Contact Information List Page Page Whats in this Guide Other Information What You Need to Know USPS Requirements Safety Requirements Page Page Important Information About Powering Your DM Series Digital Mailing System Off NONO YES ON OFF Page Introducing the DM Series Mailing System Features and Benefits Control Center Postage Meter Easy-to-Use IntelliLink COMPLIANTCOMPLIANT Parts of the Mailing System Mailing System Exterior Page Connectors on the Back of the Mailing System Base Mailing System Interior Interior of the Mailing System with Optional WOW (Under the WOW Cover) Interior of the Mailing System (Under thePrint Cover) The IntelliLink Control Center Page Page Connectors on the Back of the IntelliLink Control Center Page 3 Mail in a Minute Mail in a Minute Preparing Your Mail Running the Mail 3 Mail in a Minute Printing Postage Tapes 4 Running Mail Navigating Hints Applying Postage and Running Mail Determining the Correct Postage Mode Feeding Mail or Printing Tape? Chart B - Postage Tape Mode Chart C - Mail Modes with NO Postage Preparing Your Mai l About Running Mail Page Tips on Feeding Mail About Printing Postage Tapes Selecting the Postage Mode and Running the Mail Mode Selection: Reduced Speed Mode Mode Selection: Key in Postage Mode Selection: WOW - Weigh- On-The-Way Mode Selection: Weigh First Piece Mode Selection: Differential Weighing Mode Selection: Manual Weight Entry Mode Selection: Attached Scale Mode Selection: Seal Only Mode Selection: Time and Date Stamping Selecting or Deselecting an Account Selecting an Account Deselecting an Account Selecting the Class, Carrier, Special Services or Options Selecting ZIP Codes and Zones Selecting a Country Selecting a Smart Class Selecting the Meter Stamp Options Meter Stamp Options: Date Meter Stamp Options: Advertisement Meter Stamp Options Page Using Electronic Confirmation Services Overview Using Confirmation Services Before Printing Postage Adding Confirmation Services After Printing Postage DM525 and DM575 Series Digital Mailing System Operating Guide Editing, Deleting or Sending Confirmation Services Records Using Electronic Return Receipt (ERR) Page Page Page Using ERR with a Customer Reference Number Off-Line Electronic Return Receipt (ERR) Adding Postage or Changing the Date Clearing the Batch Count 5 Mailing System Setup Navigating Hints Overview of Mailing System Set Up Page Setting the Date and Time of Day Setting Up a Supervisor Password Creating a Supervisor Password Password Protecting an Operation Setting Up a Lock Code Setting Up the Scale and Selecting Rates WOW Weight Limit WOW Start Key Scale/Rates: Autoscale Page Scale/Rates: Destination if New Piece Scale/Rates: ZIP/Zone Prompt Scale/Rates: Destination if New Class Scale/Rates: Discount Code BMC Intra ZIP Zone 0 Add ZIPs to Scale/Rates: Confirm Svc Barcode Prompt Scale/Rates: Smart Classes Page Page Scale/Rates: Auto Rate Large Envelope Setting Up Postage By Phone Meter Payment Phone/Network Set Up: PBP Account # 7 Phone/Network Set Up: Dialing Prefix Phone/Network Set Up: PB Phone # Page Phone/Network Set Up: Use LAN Firewall Settings Phone/Network Set Up: Network Settings Phone/Network Set Up: Remote PC Refill Configuring High/Low Funds Warning Setting the Low Funds Warning Value Setting the High Value Warning for Key In Postage Configuring Low Ink Warning Configuring System Timeouts Timeouts: Display Sleep 10 Timeouts: System Sleep Timeouts Timeouts: Normal Preset Timer Timeouts: Feeding Timeout Timeouts: Waiting for Env Timeouts: Transaction Timeout Defining Presets Defining Normal Preset Values Defining Custom Preset Values Store Advance Date in a Custom Preset Editing Custom Preset Values Viewing, Renaming, or Deleting Presets Creating Custom Messages Page Page Page Configuring the Optional Barcode Scanner Setting the Default Scan Type Adding Barcode Prefixes Combining Barcodes Setting Auto-Enter 6 Adding Postage 6 Adding Postage Postage By Phone Meter Payment Your Postage Meter Connection Alternatives - Review USPS Rekey Requirements 6 Adding Postage Managing Your Postage Funds Connecting Your Postage Meter to a LAN Connecting Your Postage Meter to an Analog Phone Line Connecting Your Control Center to a Remote Analog Line Page Adding Postage Postage Pass - Automated Postage Refill Page 7 INVIEW Accounting Navigating Hints Overview of Accounting Before You Begin Using the INVIEW Accounting Setup Procedures Setting Up the Mailing System for INVIEW Setting the Accounting Period Page Setting Up a Global Surcharge or Discount Selecting an Accounting Type Setting the INVIEW Accounting Owner Page Reporting Options Clearing Account Data Setting Up Operators Enabling Operators Enabling Operator Passwords Creating Operators Setting Operator Auto Log Off Deleting Operators Viewing and Editing Operators Working with INVIEW Accounts INVIEW Accounting Account Structure Creating an Account Creating an Subaccount or Subsubaccount Viewing or Editing an Deleting an Account Running Mail Selecting an Account in Time Date Stamping Mode Selecting an Account in Seal Only Mode Entering a Batch Surcharge Selecting a Job ID Transaction Options Entering Manual Transaction Viewing the Transaction Log Transferring Transaction Data Clearing the Transaction Log Page Printing Transaction Receipts INVIEW Accounting Reports Printing Reports Report Printing Queue Report Macros Page Custom Reports Page Transaction Log Report SV62201 Rev. C 7-29 Weight Break Account/Class Weight Break Carrier/Class 7-30 SV62201 Rev. C Weight Break Job ID/Class Account Summary Report SV62201 Rev. C 7-31 Quick Profile Report settings. Accounting Setup Report 7-32 SV62201 Rev. C Account List Report Account Speed Code List Report Operator List Report Resync with Host PC 8 Reports Introduction Viewing a Report Printing a Report Report Print Queue Single Account Report Multi-Account Summary Internal Printer Version External Printer Version Last Five Refills Report USPS Confirmation Services Report (System Printer Required) Account List Report (External Printer Required) Funds Report System Set Up Report Error Report Job Report 8-12 SV62201 Rev. C Data Capture Report (Non-US Use Only) This report displays only on the screen. Use the up and down arrow keys to Electronic Return Receipt Installed/ Pending Rates Page Page 9 Maintaining and Updating Items to Keep On Hand Cleaning the Exterior Tape Maintenance Tape is still on roll Tape has run out E-Z Seal Sealing Solution Maintenance Moistener Maintenance Page Page Page Page Page Printer Maintenance Printing a Test Pattern Cleaning the Printer Nozzle Replacing the Ink Cartridge Page Changing the Printhead Page Page Changing the Wiper Blade Assembly Performing Updates or Adding Features Page 10 Troubleshooting How to Troubleshoot your Mailing Ink Waste Full Tray Warning Envelope Sealing Problems Page Page Page Page Tape Feeding Problems Printing Problems Postage Refill Problems Display Problems 3. Page Weighing Problems Page Page Page 12 Specifications Specifications Electrical and Operating Conditions Dimensions and Weight Capacities and Features NOTE: 12 Specifications Accounting Features Mailing Materials Page Page Page Page A Glossary