Planar CT1904Z manual Adjusting the Viewing Angle, Connecting AC Power, Audio Line-in optional

Chapter 1

the connection of USB compliant devices. The upstream USB port must be connected to your PC for the downstream ports to function.

4.Audio Line-in (optional)

Connect your PC’s line-out to this jack to listen the PC’s audio on the LCD monitor’s stereo speakers. (You can also connect your CD-ROM’s line-out to this jack.)

5.VGA Cable Connector

This 15-pin D-Sub VGA connector is used to connect to your PC’s VGA card.

6.DVI (Digital Visual Interface) Cable Connect (optional)

This 24-pin DVI connect is used to connect to you PC’s Graphic card which has a DVI conector

Adjusting the Viewing Angle

Your LCD Monitor is designed to allow you to adjust it to a comfortable viewing angle. The LCD Monitor’s tilt angle setting range is from -5° to 15° , and swivel angle setting is from -30° to 30° .

Connecting AC Power

1.Plug the female end of the power cable into the AC-adapter. Plug the male end of the power cord into a wall socket. The plug on the power cable will vary according to the electrical standard in your area.

2.Connect the power connector of the adapter into the jack of the LCD Monitor. The DC power jack is located at the rear of the Monitor.

3