Connect the Video and Power Cables
Use only the power adapter (Ault MW122KA1223F52), power cord, and the video cable shipped with the Dome E2c display.
To connect the cables
1Plug one end of the DVI cable into the DVI port on the connector plate. Secure the connection.
2 Plug the power cord into the power input port on the plate.
3Plug the other end of the DVI cable into the video port on the installed display controller. Secure the connection. (Use Video 1 port for the first display of a dual setup or for a single display.)
4Plug the other end of the power cord into the power adapter, and then connect the power adapter to a grounded AC outlet.
5Repeat steps 1 to 4 to connect a second display to the controller.
6 Power on the display first, then the computer.
Installing the Display 7
