Planar LX1501PTI, LX0801PTI, LX1201PTI manual Mounting the Monitor

Step 1 - Mounting the Monitor

The back and sides of the monitor include mounting points that you can use to mount the monitor as your installation requires.

Mounting holes on the LX0801PTI, LX1201PTI and LX1501PTI allow the monitor to be mounted :

•Front mounted using corner mounting holes

•Rear mounted using either VESA or edge mounting holes

•Side mounted using variegated bosses

1		Mounting from front:
	2	1. 4 corner mounting non-tapped holes in
		flange (clearance for M4 fastener).

Mounting from rear:

4

3

2.100mm VESA (4 hole pattern). Accepts M4x0.7 up to 8mm depth.

3.Edge casting holes (8 hole pattern) Accepts M4x0.7 up to 8mm depth.

Mounting from side:

4.Variegated mounting bosses Accepts M8x1.25 up to 8mm depth.

Mounting monitor to be mounted :

•Rear using rear peripheral mounting bosses

•Side points

•Side bosses

•Panel points

Use the proper M4 screws for attaching the monitor to the mounting fixture.

Removing Bezel:

•If you are flange mounting the monitor, it will be necessary to remove the decorative bezel from the enclosure. As shown, insert a narrow straight blade screw driver between the bezel and enclosure near one of the friction points. Pry upwards gently.

LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0512-01A) 11