Planar PE1700 manual Selecting Items in the OSD Menu, Adjusting the OSD Menu, Auto Setup

Item	Description
Auto	Adjusting the “Auto Setup”. See “Adjusting Auto Setup” on page 14.
	Open the “Management” submenu where you can select Brightness,
Management	Contrast or the image position for further adjustment. See Adjustment in the
	“Management” Submenu” on page 15.
	Open the “Clock/Phase” submenu where you can select Clock or Phase for
Clock/Phase	further adjustment. See Adjustment in the “Clock/Phase” Submenu” on
	page 18.
	Open the “Color” submenu where you can select Color Temperature, RGB
Color	and Black Level for further adjustment. See Adjustment in the “Color”
	Submenu” on page 19.
	Open the “OSD Display” submenu where you can select H. position or V.
OSD Display	position of the OSD display for further adjustment. See Adjustment in the
	“OSD Display” Submenu” on page 21.
Factory Recall	Recall factory-setting values back. See Factory Recall” on page 22.
	Open the “Languages” submenu where you can select one of the five
Languages	languages for your preference in display OSD messages. See “Selecting
	Language for Your Preference” on page 23.
Exit	Clear and exit the OSD main menu.

Selecting Items in the OSD Menu

To select items in the OSD “Main Menu”, you will use the ‘Up (△)’ or ‘Down (▽)’ buttons on the front panel of the display.

To select items in the OSD submenus, you will use all three, control buttons. To select a specific submenu, you shall use ‘Up (△)’ or ‘Down (▽)’ buttons to move forward or backward to the item to be adjusted, and then select it by press ‘Select’ button.

Adjusting the OSD Menu

Auto Setup

To perform the Auto Setup function you should follow the steps below:

1. Bring-up the OSD “Main Menu”.

- 10 -