E.The image is very unstable.
1.Set your PC to a supported video mode, preferably 1280 x 1024 at 60 Hz. See “Setting the Video Mode” on page 10.
2.Restore the original factory settings by choosing Factory Recall in the OSD “Factory Recall” submenu.
3.Perform the Auto Setup function. See “Auto Setup by Direct Key” on page 24.
Note: Even if your PC’s setting is out of the range of video modes that are supported by your LCD monitor, it may still be displayed with reduced quality. This provides you with an opportunity to change your PC’s setting to a correct one.
- 23 -
