Planar PL1900 manual Cable Connections, Installation Instructions

Installation Instructions

CABLE CONNECTIONS

Connecting the Signal Cable: the LCD monitor comes with a built-in signal cable. Plug the signal cable′s 15-pin connector into the computer's VGA port and tighten the two screws on the cable connector.

Connecting the Power Cord: Plug the AC-power cord into the External Adapter. Then plug the DC-jack power cable into DC-IN Inlet.

Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

Figure 1 Connecting Cables

1.	DC-Jack Power Cable	2.	Signal Cable
3.	AC Power Cord

9