OPERATING INSTRUCTIONS(cont.)
•Power Button:
Press this button to switch ON/OFF of monitor’s power.
•MENU / ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu when in Brightness/Contrast OSD status.
•Contrast :
Adjust contrast or function adjust.
•Brightness :
Adjust brightness or function adjust.
•Auto Adjust button / Exit:
1.When OSD menu is in active status, this button will act as
2.When OSD menu is in off status, press this button over 2 seconds to activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.
•Power Indicator:
Green — Power On mode.
Amber — Standby mode.
OSD Lock Function:
Option 1: OSD lock - all 4 buttons are locked except the "POWER" button. Press and hold the "MENU" and "V" buttons for 3 seconds to lock the buttons. Repeat this step to unlock.
Option 2: OSD & Power button lock - all 5 buttons including the "POWER" button are locked. Press and hold the "MENU" and " AUTO" buttons for 3 seconds to lock all 5 buttons. Repeat this step to unlock.
NOTES
•Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
•Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
•For maximum protection, repackage your monitor as it was originally packed at the factory.
•To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
12
