Planar PQ150 manual Using the Computer, Power Cord, Signal Cable

Connecting the Display

Using the Computer

1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection.

2. Connect the power cord into a proper power outlet that is easily accessible and close to the display.

NOTE

This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown.

Power Cord	Signal Cable
	Analog signal
	D-sub*

** Varies according to model. Wall-outlet type

PC-outlet type*

PC

MAC

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

A4