Planar PR6020 Powering On/Off the Projector, Powering On the Projector

Setting Up

Powering On/Off the Projector

Powering On the Projector

1.Remove the lens cap. 

2.Ensure that the power cord and signal cable are securely connected. The Power LED will flash green.

3.Turn on the lamp by pressing “Power” button on the control panel  and the Power LED will turn green.

4.Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically within “Management” menu; check that “Source Lock” has been set to “Off”.

If you connect multiple sources at the same time, use the “Source” button on the control panel or on remote control to switch.

2 Power

Turn on the projec- tor first and then the signal sources.

1 Lens Cap

English 10