Appendices
Replacing the Lamp
Warning: Lamp compartment is hot! Allow 30 minutes to cool down before changing lamp!
The projector keeps track of the lamp usage. It will show you a warning message
When you see this message, change the lamp as soon as pos- sible. Make sure the projector has cooled down for at least 30 minutes before changing the lamp.
1 | 3 |
Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.
2 | 4 |
Lamp Replacement Procedure:
1.Switch off the power to the projector by pressing the Power button.
2.Allow the projector to cool down for at least 30 minutes.
3.Disconnect the power cord.
4.Use a screwdriver to remove the screws from the cover.
5.Push up and remove the cover.
6.Remove the 2 screws from the lamp module.
7.Pull out the lamp module.
To replace the lamp module, reverse the previous steps.
English 32