Appendices
Troubleshooting
If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center.
Problem: No image appears on screen
Ensure all the cables and power connections are correctly and securely connected as described in the “Setting Up” section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” section.
Make sure you have removed the lens cap and the projector is switched on.
Ensure “Hide” feature is not turned on. If on, exit by pushing the
“Hide” button on the remote controller or by pressing the “Power” button on the projector.
Problem: Left of right edge of the image is missing or the image is unstable or noisy
Press “Resync” on the remote control or press “
” on control panel.
If you are using a PC:
For Windows 3.x:
1.In the Windows Program Manager, double click the “Windows Setup” icon in the Main group.
2.Verify that your display resolution setting is less than or equal to 1600 x 1200.
For Windows 95, 98, 2000, XP:
1.From the “My Computer” icon, open the “Control Panel” folder, and double click the “Display” icon.
2.Select the “Settings” tab.
3.Click on the “Advanced Properties” button.
If the projector is still not projecting the whole image, you will also need to change the monitor display you are using. Refer to the following steps.
English 28