Planar PS5551, PS5550, PS6500, PS4200TL, PS4250, PS4650 manual

Remote Control

Key Pad function

Menu Key function

Power Key function

5V

12V

Ambient Sensor

Thermal Sensor

Operating Time

8

8

8

9

9 A

	g		68	000: Disable
				001: Enable
				002: Pass
				through
			69	000: Disable
				001: Enable
			73	000: Disable
				001: Enable
	g		74	000: Disable
				001: Enable
g		m	6D	000~50
g		n	6E	000~120
g		p	70	0000 ~ 2000
g		q	71	-055 ~ +125
g		v	76	0 ~ 65535

Lock

Lock

Lock

Lock

Hour

4Protocol 2 : without ID

4.1Set function listing

The PC can control the LCD Monitor for specific actions. The Set-Function command allows you to control the LCD monitor behavior in a remote sit through the RS232 port. The Set-Function packet format consists of 5 bytes. Note that the “Value” byte is always = 00.

Set-Function description:

Length:	Total bytes of message = 5 ASCII (35H) excluding “CR”
Command:	Function command code: One byte ASCII code
Value[1~3]:	Three bytes ASCII that defines the value

Set-Function format:

Name	Length
Byte Count	1 Byte
Bytes order
	1

Command

1Byte 2

Value1

1Byte 3

Value2

1Byte 4

Value3

1Byte 5

CR

1Byte 6

All Set-Function from PC to Monitor (ASCII)

	Name	Length	Command	Value1
	Byte Count		1 Byte	1 Byte
		5
	Bytes order		2	3
		1
Example: Set Mute-ON command (ASCII)
	Name	Length	Command	Value1
	Byte Count		6	0
		5
	Bytes order		2	3
		1

Value2

1Byte 4

Value2

0

4

Value3

1Byte 5

Value3

0

5

CR

00D

6

CR

00D

6

________________________________________________________________

V1.0 16 / 21 Document 020-1156-00 Rev B