Contents of the Accessory Kit
Remote control with 2 batteries | Qty 1 |
Power cord, 1.8 meters | Qty 1 |
VGA cable | Qty 1 |
Keypad cover and screws for mounting |
| Qty 1 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick start guide | Qty 1 |
USB cable (A to B), 5 meters | Qty 1 (PS7050T only) |
Installing an PS7050/PS7050T
This section explains how to install a PS7050/PS7050T.
Before You Begin
Make sure you have all the items in these lists before you begin unpacking and installing your displays.
Tools/Equipment List
Depending on your installation, you may need one or more of the following items:
•String/string level
•Digital/laser level
•Ladders/lift
•Back brace
•Stud finder (if hanging display on a wall)
Other Things You May Need
•LCD screen cleaner or LCD wipes - available at most electronics stores
•At least two very strong people to help lift units into place
Plan Your Installation
You should have a detailed plan of how the units are to be configured. The plan should include calculations for the following:
•Power (maximum of five units per 20A circuit for 115V operation)
•Cable runs
•Ventilation and cooling requirements
•If hanging display on a wall, location of studs in the wall
Prepare Your Installation Location
You should have prepared the area where you will install the unit. If custom enclosures are part of the installation, they must be fully designed to accommodate the installation of the displays, as well as the installed unit and ventilation and cooling requirements.
If your installation included a lot of construction or dust, it is highly recommended that you clean all of the screens after the wall installation and configuration are complete.
PS7050/PS7050T User Manual 6
