Planar SD2020 manual Product Use, Operating in 2D mode, User controls and OSD menu

Controls and LED indicator.

Product Use

Operating in 2D mode

Your SD2020 unit can operate either as a 3D stereoscopic monitor or in the standard 2D mode. There are two options to convert to 2D:

• Simply turn off the power to one monitor.

• Lift the mirror and slide it into the locked, upright position.

To return to 3D/stereo, simply	StereoMirror in 2D mode.
reverse the procedure.

User controls and OSD menu

The two monitors have a soft DC power switch near the center of the bottom bezel. This control is used for turning the monitor on or off. To the right of the power switch is an LED

power indicator. When the LED is green, the power is on. A yellow light indicates that the monitor is in power-saving mode. The left and right Function Select buttons [Fn] can be used to control the On-Screen Display (OSD) menu selection. The left and right

Adjustment Control buttons [+/-] can be used to increase or decrease the OSD setting, respectively.

The two monitors have an OSD menu that allows control of the brightness, contrast, and color settings. Adjustment of the brightness setting is not a direct increase or decrease to the overall luminance, but a driving voltage adjustment of the LCD panel. In other words, setting the brightness to

0 (zero) does not reduce the luminance to 0 cd/m2.

NOTE: Changing the Brightness setting can reduce the number of discernable gray levels.

SD2020 9 User's Guide