Planar SD2320W manual Product Use, Operating in 2D mode, User controls and OSD menu

Controls and LED indicator.

Product Use

Operating in 2D mode

Your SD2320W unit can operate either as a 3D stereoscopic monitor or in the standard 2D mode. There are two options to convert to 2D:

• Simply turn off the power to one monitor.

• Lift the mirror and slide it into the

locked, upright position.
To return to 3D/stereo, simply	StereoMirror in 2D mode.
reverse the procedure.

User controls and OSD menu

The two monitors have a soft power switch in the center of the bottom bezel. The switch has a dual function: the control for turning the monitor the on or off and the LED indicator of monitor power status. When the LED is green, the power is on. When the LED is amber, the monitor is in power-saving mode.

The Menu (M), Select (S), up arrow (c) and down arrow (d) can be used to control the On- Screen Display menu. Press the Menu button to access the on-screen menu and to make a selection among the six main

menus. Choose the adjustment items by pressing the Select button. Adjust the value of the adjustment items by pressing the up or down arrow buttons. After a period of inactivity the OSD menus will automatically disappear.

The two monitors have an OSD menu that allows control of the brightness, contrast, and color settings. The adjustment of the brightness setting is not a direct increase or decrease to the overall luminance, but a driving voltage adjustment of the LCD panel. In other words, setting the brightness to

0 (zero) does not reduce the luminance to 0 cd/m2.

NOTE: Changing the Brightness setting can reduce the number of discernable gray levels.

SD2320W 9 User's Guide