ADE-3000 User Manual
Chapter 3 | 3 |
Login And System Status |
This Chapter details the first time login procedure and the Status screen
Login
ADE-3000 contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Browser must have JavaScript support. The configuration program has been tested on the following browsers:
∙Netscape V4.08 or later
∙Internet Explorer V4 or later
Preparation
Before attempting to configure ADE-3000, please ensure that:
∙Your PC can establish a physical connection to ADE-3000. The PC and ADE-3000 must be directly connected (using the ETHERNET port on ADE-3000) or on the same LAN segment.
∙ADE-3000 must be installed and powered ON.
∙If ADE-3000's default IP Address (10.0.0.2) is already used by another device, the other device must be turned OFF until ADE-3000 is allocated a new IP Address during configuration.
Connecting to ADE-3000
To establish a connection from your PC to ADE-3000:
1.After installing ADE-3000 in your LAN, start your PC. If your PC is already running, restart it.
2.Start your WEB browser.
3.In the Address box, enter "HTTP://" and the IP Address of ADE-3000, as in this example, which uses ADE-3000's default IP Address:
4.If connection is established, a pop-up password request page will show up. The default login User Name of ADE-3000 administrator is “admin”, and Password is “conexant”. The default login User Name for non-administrator is “user”, and Password is “password”.
