Manuals / Brands / Computer Equipment / Network Router / Planet Technology / Computer Equipment / Network Router

Planet Technology ADE-3400v2, ADE4400v2 2. Installation, 2.1 System Requirement, 2.2 Hardware Installation, 4LAN, 5USB, 6ADSL, ADE-3410

1 55

Download 55 pages, 1.2 Mb

4LAN

5USB

6ADSL

can not login to the router, e.g. forgot the password)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.

Connect the supplied USB cable to this port when connecting to the PC (ADE-3410).

Connect the supplied RJ-11 (“telephone”) cable to this port when connecting to the ADSL/telephone network.

2. Installation

This chapter offers information about installing your router. If you are not familiar with the hardware or software parameters presented here, please consult your service provider for the values needed.

2.1 System Requirement

1.Personal computer (PC)

2.Pentium II 233 MHz processor minimum

3.32 MB RAM minimum

4.20 MB of free disk space minimum

2.2 Hardware Installation

This section describes how to connect and configure the ADE-3410, ADE-3400v2, and ADE-4400v2.

ADE-3410

Contents

Page Copyright Federal Communication Commission Interference Statement FCC Caution: R&TTE Compliance Statement WEEE Safety Revision Table of Contents 1.1 FEATURE 1.2 PACKAGE CONTENTS 2.1 SYSTEM REQUIREMENT 2.2 HARDWARE INSTALLATION Page 1. Introduction 1.1 Feature 1.2Package Contents 1.3 Physical Details Top-mountedLEDs of ADE-4400v2 LED Indicator LED Meaning PPP : SYS: PWR: Rear Panel of ADE-3410 Rear Panel of ADE-3400v2 Rear Panel of ADE-4400v2 2. Installation 2.1 System Requirement 2.2 Hardware Installation ADE-3400v2 ADE-4400v2 2.3 Installing the USB Driver on a PC (ADE-3410) For Windows XP & 2000： Page Page For Windows 98 & Me： 2.4 Configuring the Network Properties Configuring PC in Windows XP Configuring PC in Windows Configuring PC in Windows 98/Me Configuring PC in Windows NT4.0 Network Protocols 2.Select TCP/IP Protocol and click Properties 3.Select the Obtain an IP address from a DHCP server radio button and click OK 3 Configuration 3.1 Determine your connection settings 3.2 Connecting the ADSL Router to your network 3.3 Configuring with Web Browser 3.3.1 Quick Setup Guide Next Page Page 3.3.2 System Time 3.3.3 Admin Setting 3.3.4 Firmware Update 3.3.5 System Log 3.3.6 System Reset 3.4.1 ADSL Status 3.4.2 ADSL Statistics 3.4.3 VC Configuration 3.5.1 WAN Configuration 3.5.2 WAN Status 3.5.3 DNS 3.5.4 DDNS 3.6.1 LAN Configuration 3.7.1 IP Filtering IP Filter Set Editing IP filter Set Index: Interface: Direction: “Outgoing” 3.8.1 NAT Setting 3.8.2 Virtual Server 3.8.3 DMZ Setting 3.8.4 ADSL Type Setting 3.9.1 Static Routing 3.9.2 Dynamic Routing 3.9.3 Routing Table 3.10.1 System Status 3.11.1 Access Control List 3.12.1 Simple Network Management Protocol 3.13.1 Universal Plug and Play 3.14.1 System Diagnostics Appendix A: Glossary CPE DHCP (Dynamic Host Configuration Protocol) DMT Downstream rate DSLAM FTP Hop count HTML HTML browser http IP address ISP MAC MIB NAT Remote server RFC Route Router Routing Table Spanning-TreeBridge Protocol (STP) Spoofing Static IP Address Subnet TFTP Telnet Transparent bridging UDP UNI signaling Virtual Connection (VC)