Mode: Select Routing (default). If your ISP allows multiple computers to share an Internet account. Otherwise select Bridge.

Encapsulation: Select the encapsulation type your ISP uses from the Encapsulation drop-down list box. Choose vary depending on what you select in the Mode field.

If you select Bridge in the Mode field, select 1483 Bridged IP.

If you select Routing in the Mode field, select PPPoA, 1483 Bridged IP, 1483 Router IP, or PPPoE.

Multiplex: Select the multiplexing method used by your ISP from the Multiplex drop-down list box either VC-based or LLC-based.

Virtual Circuit ID: VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit.

VPI: Enter the VPI assigned to you. This field may already be configured.

VCI: Enter the VCI assigned to you. This field may already be configured.

4.1.2 PPPoE

PPPoE （PPP over Ethernet）provides access control and billing functionality in a manner similar to dial-up services using PPP. Select PPPoE from the Encapsulation in the first wizard screen to display the screen as shown.

25