multiple WAN connections. The LAN traffic is routed to appropriate WAN connections based on the destination IP addresses and Route Table. This eliminates the need for the static NAT session configuration between multiple LAN clients and multiple WAN connections.
4.2.4.1 Selecting the NAT Mode
None: Select this radio button to disable NAT
Many to One: Select this radio button if you have just one public WAN IP address for your router.
Edit Details: Click this link to go to the NAT - Edit Port Mapping rule screen.
Many to Many: Select this radio button if you have multiple public WAN IP addresses for your router.
Edit Details: Click this link to go to the NAT - Address Mapping Rules screen.
4.2.4.2 Configuring Edit Port Mapping
Click NAT, Select Many to One and click Edit Details to open the following screen.
38