Rear PanelRear panel Port and Button DefinitionPortDescription

●Reboot router: press the reset button for less than 5 seconds, and it will keep your original configurations.

●Load factory default setting: press the reset button

Reset

for longer than 5 seconds and the router will reset

 

itself to the factory default settings

 

(Warning! your original configurations will be replaced

 

with the factory default settings)

 

 

Power

Power connector with 12V DC 1A.

Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients and this ADSL router. Press this button on the router and

WPS Button enable WPS function of the wireless clients, the router and clients will automatically configure the security key

and connect directly. Please note that the router will wait for WPS requests from wireless clients in 2 minutes after the WPS button is pressed.

 

Router is successfully connected to a device through

LAN1-4

the corresponding port (1, 2, 3, or 4). If the LED is

flashing, the Router is actively sending or receiving data

 

 

over that port.

 

 

ADSL

The RJ-11 connector allows data communication

between the modem and the ADSL network through a

Connector

twisted-pair phone wire.