Planet Technology ADN-4000 Configuration, Preparation, Using your Web Browser

Configuration

The ADN-4000 contains a HTTP server. This enables you to connect to it, and configure it, using your Web Browser.

Preparation

Before attempting to configure the ADN-4000, please ensure that:

•Your PC can establish a physical connection to the ADN-4000. The PC and the ADN-4000 must be directly connected (using the Hub ports on the ADN-4000) or on the same LAN segment.

•The ADN-4000 must be installed and powered ON.

•If the ADN-4000's default IP Address (192.168.1.1) is already used by another device, the other device must be turned OFF until the

ADN-4000 is allocated a new IP Address during configuration.

Using your Web Browser

1.Open web browser and type http://192.168.1.1 in the browser’s address box. This number is the default IP address for this device. Press Enter.