3.Connect ADSL Cable

Connect the supplied ADSL cable from to the WAN port on the ADN- 4000 (the RJ-11 connector) to the ADSL terminator provided by your phone company.

4.Power Up

Connect the supplied power adapter to the ADN-4000. Use only the power adapter provided. Using a different one may cause hardware damage.

5.Check the LEDs

•The PWR LED should be ON.

•The WLAN LED should be flash, when wireless AP is ready.

•The ADSL LED should be ON if ADSL line is connected.

•For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the PC is also ON.)