Chapter 2

2

Installation

This Chapter covers the physical installation of ADW-4100.

System Requirements

PC or TCP/IP compliant workstations

32 MB RAM

Ethernet Network Interface Controller (NIC) RJ45 Port

Internet Browser

Installation Procedure

Figure 2-1: Installation DiagramStep 1Choose an Installation Site

Select a suitable place on the network to install ADW-4100. Ensure ADW-4100 is powered OFF.

Step 2

Connect LAN Cables

Use standard LAN cables to connect PCs to the LAN port on ADW-4100. Either 10BaseT or 100BaseT connections can be used.

Step 3

Connect WAN Cable

Connect one end of the RJ-11 phone cord to the LINE port on your ADSL modem. Connect the other end of the RJ-11 phone cord to your wall phone jack.

Step 4

Power Up

5