ADW-4100 User Manual

ADSL Configuration

The ADSL Configuration page allows you to set the configuration for ADSL proto- cols.

Trellis

Trellis Code. By default, it is always enabled.

Handshake Protocol

This is for the ADSL handshake protocol.

Wiring Selection

The wiring selection for the RJ-11.

Bit Swapping

Bit swapping enables an ADSL system to change the number of bits assigned to a subcarrier, or change the transmit energy of a subcarrier without interrupting data flow. (No need to configure this item unless it is necessary)

Figure 6-6:ADSL Configuration Screen

RIP Configuration

The RIP Configuration page allows the user to set the configuration for the system wide configuration of RIP. The actual RIP configuration is in the RIP Per Interface Configuration.

Figure 6-7:RIP System Wide Configuration Screen

RIP

42