ADSL Wireless Firewall Router User Guide

Physical Details

Front-mounted LEDs

PWR LED

STATUS LED

LAN

WLAN LED

ADSL

Figure 2: Front Panel

On - Power on.

Off - No power.

Off - Normal operation.

Blinking - This LED blinks during start up, and during a Firmware Upgrade.

For each port, there are 2 LEDs, to indicate the connection speed (10Base-T or 100Base-T) of each port.

∙100 LNK/ACT - This will be ON if the LAN connection is using 100BaseT, and Blinking if data is being transferred via the cor- responding LAN port.

∙10 LNK/ACT - This will be ON if the LAN connection is using 10BaseT, and Blinking if data is being transferred via the corre- sponding LAN port.

∙If neither LED is on, there is no active connection on the corre- sponding LAN port.

On – Wireless enabled.

Off - No Wireless connections currently exist.

Flashing - Data is being transmitted or received via the Wireless access point. This includes "network traffic" as well as user data.

On - ADSL connection is available. Off - No ADSL connection.

Flashing - Data is being transmitted or received via the ADSL connection.

4