Operation and Status
Data - Status ScreenInternet| Modem Status | This indicates the status of the ADSL modem component. |
|
|
| DownStream | If connected, displays the speed for the DownStream |
| Connection Speed | (download) ADSL Connection. |
|
|
| UpStream | If connected, displays the speed for the UpStream (upload) |
Connection Speed | ADSL Connection. |
| Connection Method | This indicates the current connection method, as set in the |
| Setup Wizard. |
| Internet Connection | This indicates the current status of the Internet Connection |
| ∙ Active - Connection exists |
| ∙ Idle - No current connection, but no error has been |
| detected. This condition normally arises when an idle |
| connection is automatically terminated. |
| ∙ Failed - The connection was terminated abnormally. |
| This could be caused by Modem failure, or the loss of |
| the connection to the ISP's server. |
| If there is an error, you can click the "Connection Details" |
| button to find out more information. |
| Internet IP Address | This IP Address is allocated by the ISP (Internet Service |
| Provider). If using a dynamic IP address, and no connection |
| currently exists, this information is unavailable. |
| Connection Details | Click this button to open a |
| description of the current connection. Depending on the |
| type of connection, a "log" may also be available. |
|
|
LAN |
|
IP Address | The IP Address of the ADSL Wireless Firewall Router. |
|
|
Network Mask | The Network Mask (Subnet Mask) for the IP Address |
| above. |
DHCP Server | This shows the status of the DHCP Server function. The |
| value will be "Enabled" or "Disabled". |
| MAC Address | This shows the MAC Address for the ADSL Wireless Fire- |
| wall Router, as seen on the LAN interface. |
| Wireless |
|
| Name (SSID) | If using an ESS (Extended Service Set, with multiple access |
| points) this ID is called an ESSID (Extended Service Set |
| Identifier). |
|
|
| Region | The current region, as set on the Wireless screen. |
|
|
| Channel | This shows the Channel currently used, as set on the Wire- |
| less screen. |
| Wireless AP | This indicates whether or not the Wireless Access Point |
| feature is enabled. |
| Broadcast Name | This indicates whether or not the SSID is Broadcast. This |
| setting is on the Wireless screen. |
35