Appendix A
Troubleshooting
A
This Appendix covers the most likely problems and their solutions.
Overview
This chapter covers some common problems that may be encountered while using the ADSL Wireless Firewall Router and some possible solutions to them. If you follow the suggested steps and the ADSL Wireless Firewall Router still does not function properly, contact your dealer for further advice.
General ProblemsProblem 1: Can't connect to the ADSL Wireless Firewall Router to configure it.Solution 1: Check the following:
∙The ADSL Wireless Firewall Router is properly installed, LAN connections are OK, and it is powered ON.
∙Ensure that your PC and the ADSL Wireless Firewall Router are on the same network segment. (If you don't have a router, this must be the case.)
∙If your PC is set to "Obtain an IP Address automatically" (DHCP client), restart it.
∙If your PC uses a Fixed (Static) IP address, ensure that it is using an IP Address within the range 192.168.0.2 to 192.168.0.254 and thus compatible with the ADSL Wireless Firewall Router's default IP Address of 192.168.0.1.
Also, the Network Mask should be set to 255.255.255.0 to match the ADSL Wireless Firewall Router.
In Windows, you can check these settings by using Control
Solution 1: A number of things could be causing this. Try the following troubleshooting steps.
∙Check if other PCs work. If they do, ensure that your PCs IP settings are correct. If using a Fixed (Static) IP Address, check the Network Mask, Default gateway and DNS as well as the IP Address.
∙If the PCs are configured correctly, but still not working, check the ADSL Wireless Firewall Router. Ensure that it is connected and ON. Connect to it and check its settings. (If you can't connect to it, check the LAN and power connections.)
∙Check the ADSL Wireless Firewall Router's status screen to see if it is working correctly.
73