STEP5:Please ensure DVR-400 is power OFF before commencing, and check the power supply status. Use standard RJ-45 cables to connect the LAN port on DVR-400.
Connect the supplied Power Adapter and power on machine.
The PWR LED Indicator should be Green during normal operation
After powering on the DVR-400, it will check HDD for several seconds; the information will be displayed on the monitor:
HDD Checking… | HDD Checking…OK |
MASTER HARD DRIVE | LAN Checking…OK |
[HDD Model number] | Audio Checking…OK |
After the internal checking completed, DVR-400 will enter into real-time display mode, the images on the connected camera will be displayed in real-time.
CH1 CH2
CH3 CH4
