Physical Interfaces

Physical conection interface of DVR-400 are shown and explained in the following descriptions.

2

 

7

8

10

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

6

9

11

 

 

 

5

 

3

 

 

 

 

 

 

1.

S-Video:

 

 

 

 

 

 

2.

Video output:

 

 

 

 

 

 

3.

Monitor: Second Video output.

 

 

4.

Video input: Connect your standard video cameras to these inputs.

5.

Video loop-through:These outputs provide loop-through connections, and can be used for direct

 

monitoring of the connected video cameras.

 

 

6.

Sensor input/alarm output: 4 sensor inputs and one alarm output.

7.

NTSC/PAL switch:

 

 

8.

DC-in (12Voltage): Connect the power cable here.

 

 

9.

Audio input/output:

 

 

10.

LAN: 10/100 Ethernet via the RJ-45 socket.

 

 

11.

Power switch: This switch should only be used after shutting down the unit correctly with the help of the

 

Power button on the front panel.

 

 

4