DVR-400 provides 5 different modes to meet the various surveillance application demands:

1.Not installed.

2.Normal open.

3.Normal close.

4.Motion +N-C

5.Motion + N-O

In normal open mode, the cable line Connected between the sensor and the unit is cut off by an intruder, the unit starts recording.

In normal close mode, the cable line Connected between the sensor and the an intruder, the unit stops recording, cuts off unit.

How to enable the Motion detection recording in DVR-400

SENSOR SETUP

 

SENSOR RECORD TIME

15

ALARM OUT TIME

20

CHANNEL-1 TYPE: MOTION + N-C

CHANNEL-2 TYPE: MOTION + N-O

CHANNEL-3 TYPE: NORMAL CLOSE

CHANNEL-4 TYPE: NOT INSTALLED

PRESS (Ù,Ú), THEN (SELECT)

PRESS (MENU) TO EXIT

STEP 1:

Please go to “SENSOR SETUP” menu

STEP 2:

Toggle the motion detection option.

STEP 3:

After the selection, please browse to MAIN MENU and go to “RECORD SCHEDULE” menu to enable the alarm setting, so that the motion detection video recording will operate properly.

PROGRAMMED RECORD

+TTTSSTTTTTTTTTTTTTTTTTTT+

0

3

6

9

12

15

18

21 24

T: TIME

S: SENSOR _--: NONE

PRESS (Ù,Ú), THEN (SELECT)

PRESS (MENU) TO EXIT

21