2.2.4 Status LEDs
One POWER LED to show power On/Off is on the front panel and each port has two status LED indicators, as shown below.
LABEL | STATUS / | MEANING | DESCRIPTION |
| COLOR |
|
|
UPPER | Steady | 100M | Lit to indicate that a valid physical |
ROW | orange |
| UTP/STP connection exists on |
|
|
| that port runs in 100Mbps |
| OFF | 10M | Remains off and Link ON to in- |
|
|
| dicate the port runs in 10Mbps |
LOWER | Steady | Link | Lit to indicate that a valid physical |
ROW | Green |
| UTP/STP connection is detected |
| Blink | Activity | Blink to indicate the port is re- |
| Green |
| ceiving data packets |
Table B: The Switch's
2.3 The Rear Panel
5
Figure 2: Rear View for FNSW-3200
2.3.1 Power Connector
The Power Connector is designed to be use with the power cord included in the product package. Attach the female end of the cord to the power connector and the male end of the cord to a grounded power outlet. The accepted power range is from 100VAC to 240VAC, 50/60Hz.
- 5 -
