Planet Technology FNSW-3200 warranty Rack-Mount Installation, Desktop Installation

3. INSTALLATION

The Switch do NOT require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power.

To get the best use of these Switch models, many things need to be considered first. See Section 4. OPTIMIZING CONFIGURATION for details.

3.1 Rack-Mount Installation

Most users prefer to attach the power cord to the hub before installation in a network rack. Do not plug the other end of the cord into a power outlet until after the hub is installed.

For mounting the Switch in a network rack, first attach the rack-mount brackets to the side of the hub with screws. (Both brackets and screws are included in the product package.) Slide the hub into the rack and align the holes in the bracket with the corresponding holes in the network rack. Attach the bracket to the rack with the enclosed screws.

3.2 Desktop Installation

To locate the Switch on a desktop, first attach the four rubber feet to the bottom of the hub, one in each corner. Place the hub on a clean, flat desk or tabletop close to a power outlet. Make sure there is no hindrance behind the fan of the hub

Plug in all network connections, and then turn the switch on via plug in the power cord.

- 7 -