Chapter 5 DIP SWITCH

There is a DIP switch for the setting on converter mode of copper and fiber port. Refer to the table below for more details.

FT-1105A

Switch 1

On

2-Port Redundant (TP)

 

 

Off

3-Port Switch (default)

 

 

 

 

Switch 2

On

LBR ON

 

 

Off

LBR OFF (default)

 

 

 

 

2-Port Redundant (FT-1105A)

When TP Redundancy is enabled, TP Port-2 and TP Port-3 are configured as either forwarding or disabled. At any given time, one port will be disabled and one port will be forwarding.

3-Port Switch

When TP Redundancy is disabled, all ports (Port-1, Port-2 and Port-3) act as normal bridging ports.

LBR (Loop Back Reply)

Enable/Disable the converter to reply for Loop Back Test.

12