Step 2: Carefully slide in the module until it is fully and firmly fitted into the slot of the chassis.

Figure 2-1:Insert a media converter into an available slot

Step 3: Attach a rack-mount bracket to each side of the Chassis with supplied screws attached to the package.

Step 4: After the brackets are attached to the chassis, use suitable screws to securely attach the brackets to the rack, as shown in Figure 2-2.

Step 5: Proceed with the steps 4 and steps 5 of session 6.1 Stand-alone Installation to connect the network cabling and supply power to your chassis.

 

 

You must use the screws supplied with the

 

 

mounting brackets. Damage caused to the parts

 

Caution

by using incorrect screws would invalidate your

 

warranty.

 

 

 

 

 

16