4. CONFIGURATION

The FT-90X Web Smart Media Converter provide Web interface for Media converter smart function configuration and make the Media converter operate more effectively - They can be configured through the Web Browser. A network administrator can manage and monitor the FT-90x from the local LAN. This section indicates how to configure the media converter to enable its smart function.

4.1 Main Menu

After a successful login, the main screen appears, the main screen displays the converter Welcome page. The screen in Figure 4-1 appears.

Figure 4-1Web Main screen

As listed at the left of the main screen, the configurable smart functions are shown as below:

◆System – Check the hardware, software version and System MAC address and IP address of the converter.

◆Port Configuration - Setup per port Speed/Duplex mode, Flow Control and In/Out bandwidth control.

◆Converter Configuration – Setup the broadcast storm control, QoS and converter LLR mode.

◆Converter Status – Shows the converter’s copper and Fiber ports linking status.

◆Statistics – Shows the statistics of packet count from copper and Fiber ports.

◆Tools – Provide tools to Reboot / Factory Reset / Firmware Update / Configuration Upload the converter.

-13-