Planet Technology ■Factory Reset

Figure 4-20Configuration restore screen

■Factory Reset

The Factory Reset button can reset the FT-90x back to the factory default mode. Be aware that the entire configuration will be reset, and the IP address of the FT-90x will be set to “192.168.0.100”.

Figure 4-21Factory Reset screen

Once the Factory Reset item is pressed, the screen in Figure 4-22 appears.

Figure 4-22Factory Reset screen

"To reset the IP address to the default IP Address “192.168.0.100”. Press the hardware reset button

Note: at the front panel about 10 seconds. After the device be rebooted. You can login the management WEB interface within the same subnet of 192.168.0.xx.

Hardware Reset button

-31-